Gold Dragon Skull – proiect STL 3D

Descriere

3D MODEL DESCRIPTION

Not everything that shines is gold. The people who crossed this dragon’s path learnt this lesson the hard way.
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 1 Day 13 Hours 34 Minutes (will vary accord to you printer model)
Approximately Height: 20 cm

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!

 
Vrei să cumperi produsul printat 3D?
 
Mergi la pagina de produs