Descriere
3D Model Description
If you prefer less static prints, this dragonfly is ready to go dragonflying around. Even with a pretty cool mechanism, the printing of this model is an easy breeze. Make yours solid or multicolor, whatever draws the least predators!
This STL file is recommended for FDM Printers!
3D Printing Time: 11 Hours 59 Minutes
Approximately dimensions: 16 cm X 16 cm
3D Print File Settings (For 0.4 Mm Nozzle)
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20 mm/s (First Layer) / 50 mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.12 mm
Recommended Layer Height: 0.12 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
Vrei să cumperi produsul printat 3D?
Mergi la pagina de produs
Recenzii
Nu există recenzii până acum.