Frosty Dragon – proiect STL 3D

Descriere

3D MODEL DESCRIPTION

From the peaks of icy mountains, she’s here to cool things down, quite literally.
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 17 Hours and 01 Minutes (will vary accord to you printer model)
Approximately Height: 15 cm

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: No. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!

 
Vrei să cumperi produsul printat 3D?
 
Mergi la pagina de produs