Descriere
3D MODEL DESCRIPTION
Frankly I think this model is a bit ropeless.
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 01 Day, 15 Hours, 16 Minutes (will vary accord to you printer model)
Approximately Height: 25 cm
Use a 35 cm long thread to tie to Santa’s leg and the elf’s hand.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 016 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!
Vrei să cumperi produsul printat 3D?
Mergi la pagina de produs
Recenzii
Nu există recenzii până acum.