Dragon Warden Light Switch Cover – proiect STL 3D

Descriere

3D MODEL DESCRIPTION

If your switches need a guardian, what better creature than a dragon?
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 19 Hours 32 Minutes (will vary accord to you printer model)
Approximately Height: 18 cm „NOTE: This model is designed to fit toggle-like light switches only.”

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: Yes. (WALL PLATE ONLY)
Build Plate Adhesion: Skirt. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing! Assemble

3D MODEL DESCRIPTION

Place the light switch inside the handy box or on the wall Assemble

3D MODEL DESCRIPTION

Put the regular wall plate in and then the 3D printer cover on top Assemble

3D MODEL DESCRIPTION

Secure them to together with two screws Assemble

3D MODEL DESCRIPTION

Finish it by placing the rest of the 3D printed adornments.

 
Vrei să cumperi produsul printat 3D?
 
Mergi la pagina de produs