Santa’s Living Room Table Lamp – proiect STL 3D

Descriere

3D MODEL DESCRIPTION

A great Christmas light for a great Christmas night.
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 02 Days, 02 Hours, 59 Minutes (will vary accord to you printer model)
Approximately Height: 16 cm
You Will Need To: Flame LED Candle – AliExpress , Mercado Livre , Amazon

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.20 mm
Recommended Layer Height: 0.20 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: Yes. You will used (Tree Manual Support) only “Room Files” on candle hole.
Build Plate Adhesion: None. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!

 
Vrei să cumperi produsul printat 3D?
 
Mergi la pagina de produs