Descriere
3D MODEL DESCRIPTION
It seems Santa is stuck. If only there was a way of opening this. Oh wait, there you go! It’s the perfect hiding place.
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 02 Days 23 Hours 56 Minutes (will vary accord to you printer model)
Approximately Height: 20 cm
You will need neodymium magnets 5mm X 1mm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!
Vrei să cumperi produsul printat 3D?
Mergi la pagina de produs
Recenzii
Nu există recenzii până acum.